Product Description

The AKD-P00306-NBSQ-0000 Ethernet servo drive manufactured by Kollmorgen is a position indexer. This servo drive can deploy a cooling system inside the control cabinet to prevent the possibility of overheating. The product can be enabled using the setup wizard of the WorkBench software. This device related advanced configuration can be completed using the Settings view of its hardware. The unit related logic power can be turned on through the X1 connector. It must never be started or operated without a grounding connection. This drive is meant to be adapted to the requirements of the machine in which it is installed. The product associated parameters as well as operating conditions can be set up using a PC with the WorkBench software installed. The device incorporates SynqNet connectivity option. This unit is compatible with most standard feedback devices. It comes with a DVD featuring the installation program for its setup software. The drive related IP address can be set up in the WorkBench software. This product has a rated input current of 2.3 A at 3 x 120 / 240 V. The device allows the inclusion of an external regen resistor if needed. This unit has no built-in fan. The servo drive has a rated supply voltage of 1 x 120 V to 240 V or a 3 x 1 x 120 V to 240 V with +/-10% tolerance. This product controls the holding brake of the connected Kollmorgen motor. The device has the capability to detect over-voltage, over-temperature and over-current. This unit has a fast digital control loop. Its advanced autotuning feature makes the drive very easy to use. The drive has no option cards. This product can be kept only on conductive surfaces.