Product Description

The AKD-P00306-NBPN-0000 Ethernet servo drive produced by Kollmorgen must have low-resistance earthing to ensure personnel safety. This servo drive can cause minor burns if its hot surface is touched when it is in use. The product is likely to get damaged when it makes contact with plastic films. This device is free of any harmful substances that have a negative impact on the environment. The device must adhere to the technical data in its rating plate. This unit can trigger unfavorable consequences with improper handling. It may be required to adopt additional cooling measures to ensure that the temperature inside the control cabinet is less than 40 °C. The servo drive must incorporate copper conductors for wiring purposes. This product is connected to the PROFINET RT interface through its X11 RJ-45 connector. The device gets its IP address through an external DHCP server if both rotary switches are set to zero. This unit can be set up easily using the WorkBench software. It can be connected to different types of feedback devices based on need. The drive allows its programmable digital inputs to be set as high or low inputs. This product has a voltage rating of 3.5 V to 30 V and a current rating of 2 mA to 15 mA for its first two digital inputs in the High state. The device uses its digital inputs to initiate the stored pre-programmed functions. This unit has a -3dB bandwidth of more than 8kHz for its analog output. It calculates the position of the motor shaft from the absolute signals generated by the primary feedback. The servo drive supports connection to a stepper motor controller. This product related parameters are set up with the WorkBench software. The device has 10 A maximum inrush current rating. This unit portrays a DC bus capacitance of 940 µF. The unit has a height of 168 mm without connectors.