Product Description

The AKD-P00306-NBCN-0000 AKD series Ethernet servo drive from Kollmorgen has an automatic private IP address in the 169.254.x.x format when a DHCP server is not present. This servo drive has two rotary switches that can be used to set its IP address. The product has a position loop bandwidth ranging between 1 Hz and 250 Hz. This device related transmission rate can be set using the FBUS.PARAM01 parameter. The unit is characterized by the Er code on its seven-segment display when the DRV.TYPE instruction fails. It is characterized by a standard width housing. This drive transportation is meant to be done by only people who have the expertise to handle electrostatically sensitive components. The product is to restart automatically when there is a voltage dip based on how its parameters have been set. This device should not be allowed to come in contact with highly insulating materials such as plastic films and artificial fabrics. The unit must be connected to its protective earth block using a cable with a cross-section of more than 10mm2. It might cause personnel injury if the electrical connections are undone when the drive is in the live state. This servo drive offers no assurance of personnel protection without low-resistance earthing. The product related heatsink has a very high temperature of more than 80 °C during the operation period. This device operation must never take place without establishing a grounding connection. The unit incorporates a certified STO safety implementation function. Its thermal sensors must incorporate reinforced insulation as per IEC 61800-5-1 specifications. This product should not have more than 200kA symmetrical current rating at 120/240 V. The device must not have voltage spikes of more than 2000 V between its housing and a phase.