AKD-M00606-M1EC-0000
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
Available
The Kollmorgen AKD-M00606-M1EC-0000 AC servo drive is a motion control drive with EtherCAT connectivity option. The drive incorporates a wizard-based autotuning mechanism.
To contact sales for pricing and lead time:
Payment Methods




Shipping Methods




Our Credentials




Product Description:
The AKD-M00606-M1EC-0000 AC servo drive is a reliable drive that supports plug-and-play setup and is designed for use in industries. The drive is set up using Kollmorgen’s WorkBench software. Its interface is an intuitive graphical user interface. The device should not be placed or stored in a site that contains highly insulating materials, because if exposed to insulating materials, its components might get damaged. When operated in non-industrial areas, the drive causes high-frequency interference. The current rating of the servo drive is 6 Arms and its voltage rating is 120/240 VAC. One-phase and three-phase systems can be used to connect the drive. There is no internal regen resistor in the unit. However, if required, it can be connected to an external resistor with a resistance of 33 Ohms. The maximum continuous regen power of the drive’s external resistor is 1.5 kW. Its peak regen power of the external resistor is 5.4 kW for one second. There are some basic tools that are required to install the device, including an M4 hexagon socket-cap screws, a No.2 Phillips head screwdriver, a 3 mm T-handle Allen key, and a small-slotted screwdriver. The use of the servo drive is prohibited in a few environments that include potentially explosive areas and sites exposed to corrosive or electrically conductive acids, vapors, oils, and alkaline solutions. The device must be cleaned and maintained only by the manufacturer. Opening the device voids the warranty under any circumstances. Care must be taken to ensure that no liquid enters the unit. The servo drive has an Emergency Stop function to shut down the machine quickly in a dangerous situation and an Emergency Off function to switch off the electrical power supply.
Frequently Asked Questions about AKD-M00606-M1EC-0000:
Q: In what temperature range should the AKD servo drive be operated?
A: The AKD servo drive should be operated in the temperature range of 0°C to 40 °C.
Q: What is the rated output current of the AKD servo drive?
A: The AKD servo drive features a rated output current of 6 Arms with +/-3% tolerance.
Q: What is the absorption energy of the AKD servo drive’s capacitors at 120/240 V supply voltage?
A: The absorption energy of the AKD servo drive’s capacitors is 60 W at 120 V supply voltage and 20 W at 240 V supply with +/-20% tolerance.
Q: Should the AKD servo drive be assembled near its power supply module?
A: Yes, the AKD servo drive should be assembled near its power supply module.
Q: What is the DC Bus capacitance of the AKD servo drive?
A: The DC Bus capacitance of the AKD servo drive is 940 microfarads.