Product Description

The AKD-B00607-NBAN-0000 servo drive from Kollmorgen has several mating connectors, a push-button, two rotary switches and an LED display to support its operation. This product is controlled by analog velocity and torque commands. The device has no SD card slot. This unit features a switch-on threshold limit of 380 V at 240 V supply voltage for its regen circuit. It must be ensured that there is sufficient clearance above and below the drive inside the control cabinet for sufficient ventilation. The drive features an enabled holding brake function. This product highlights a F502 code on the LED display when there is an undervoltage fault. The device has a standard width housing. This unit should have a constant 24 V supply. Its Hardware Enable input causes an immediate disabling of the power stage. The drive behavior is influenced by the type of fault encountered. This product supports plug-and-play commissioning. The device encompasses inputs and outputs with optical isolation and screw terminal I/O connectors. This unit depicts an update rate of 1 to 1.5 MHz. Its STO input has a reaction time of less than 10 ms. The servo drive comes with a temperature monitoring functionality. This product has a service interface that can be connected to the Ethernet interface of the PC either directly or through a network hub switch. The device has live connecting points during operation. This unit is connected to the PC using standard Cat.5 Ethernet cables or at times using crossover cables. Its service interface has four pins for transmitting and receiving negative and positive signals. The drive deploys static IP addressing when a direct connection is established with a PC.