Product Description

The AKD-B00306-NBEC-0000 Ethernet servo drive is manufactured by Kollmorgen. The manufacturer is known for its high-class products with industry-leading performance. This drive can be connected to the appropriate motor through a plug-and-play action. The product is associated with a 24 V control logic supply voltage. This device can be set up or subject to basic tests by only people with expertise in drive technology and electrical engineering. The unit depicts either a DC frequency or an AC rated supply input frequency of 50 Hz to 400 Hz with a tolerance of +/-5%. It comes with a standard housing. This drive installation and commissioning are intended to be carried out only after reading its documentation. The product may restart automatically based on the parameter setting. This device must neither be touched nor opened during operation. The unit has a certified STO safety implementation. It drives synchronous servomotors with closed-loop torque control. This drive can be connected to a one- or three-phase industrial power supply network. The product must not have a periodic overvoltage exceeding 1000 V between phases. This device can be considered for group installations only after appropriate evaluations are done for wire voltage rating, branch circuit protection, fuse protection and other parameters. The unit can trigger equipment damage if its usage is carried out in ways other than intended by the manufacturer. It has a rated input current of 5 A on a single-phase system with 120 V rating. This servo drive can be connected as a slave to the Ethernet network through its X5 and X6 RJ-45 connectors that have built-in LEDs to indicate the communication status. The product encompasses a B1 pushbutton with pre-defined functions.