AKT-SM-L15-000

Product Description

The AKT-SM-L15-000 is a bus terminal that is designed to connect small stepper motors. It is versatile allowing the operator to adjust it to the application and motor for desired performance. Like other bus terminals, it features a quiet, reliable, and precise motor operation. Its electrical specifications include 2 inputs, 2 x 1A, 2 x 1.5A peak current. The current is overload and short circuit proof mitigating machine damage. The maximum steps that the AKT-SM-L15-000 can achieve are 125, 000 steps. It provides half step, full step, and 64-fold micro-stepping.

The AKT-SM-L15-000 has a current controller frequency of approximately 25 kHz, a resolution of approximately 5,000 positions per revolution. It utilizes a power supply of 8 to 24 V DC and electrical isolation of 500Vms. Its mechanical characteristics are a weight of 50g and a protection class of IP 20. Ambient conditions are an operating and storage/transport temperature of 0 to 55 degrees and -25 to 85 degrees respectively, a maximum installation elevation of 1000 meters above sea level, and a permissible relative humidity of 95% with no condensation.  To avoid bodily injury during installation, you should bring the AKT-SM-L15-000 into a safe, powered downstate.

This bus terminal affords you numerous advantages such as high machine performance, enhanced ease-of-use and integration, demonstrated solution, and reliable scalability. You can install the AKT-SM-L15-000 in any position inside a terminal box. The control cabinet should meet IP 10 protection class demands. This is to protect the terminal from intentional access by hand and penetration by water. The signal current is between 0 and 20mA and it comes with an accuracy of 0.3% and a conversion time of 8ms.