Product Description

The 43.SM.201-64BJ is a synchronous servo motor manufactured by KEB Automation to function in combination with the digital servo controller and serve industrial servo system. This product complies with the harmonized standards of the series VDE 0530/EN 60034; although it has strong housing, its use in hazardous areas is prohibited unless explicitly permitted. The 43.SM.201-64BJ synchronous motor is an IP65 protection device; under normal operating conditions, it can comfortably withstand interference from both solid and liquid foreign substances. The permissible ambient temperature for the operation of this product is between -5 to about 40 degrees Celsius, and the installation altitude should also be less than 1000 meters above sea level. There is no air blower integrated into this product; customers should ensure that it is mounted in a way that allows for sufficient heat dissipation through convection and radiation.

The 43.SM.201-64BJ is equipped with an output shaft that has a featherkey and guarantees the smooth transmission of torque to industrial machine components. There are two connectors integrated into the housing of this servo motor; this includes the power connector and the motor feedback connectors. These electrical connectors are specially designed to ensure that the IP65 protection category of the motor is maintained. The maintenance of this industrial motor is limited to cleaning its housing surface to prevent the build-up of dust, which can interfere with heat dissipation by natural convection.

The 43.SM.201-64BJ servo motor contains special radial groove ball bearings which are lubricated for life and have a nominal service life of 20,000 hours. Under normal operating conditions, this motor operates with an input voltage of 330 volts and can reach a rotational speed of 6000 revolutions per minute. .