Product Description

The 03.S4.D2E-3011 is a compact industrial drive controller designed by KEB Automation for the exclusive control of the speed, position, and general operation of the SM KEB COMBIVERT synchronous motor series. This controller has a strong and compact housing unit that can provide long-lasting protection against large solid interference. The rated speed of the industrial motor controlled by this product is measured to be about 3000 revolutions per minute; the product also provides resolver/incremental encoder simulation. The 03.S4.D2E-3011 industrial drive controller can be installed at an elevation as high as 1000 meters above sea level; above this height, a power reduction of 1% per 100 meters must be taken into account for the operation of the servo motor. This drive controller is not built for use in harsh conditions; operators need to install the controller in a control cabinet that provides it with dustproof housing.

The 03.S4.D2E-3011 drive controller contains an air blower which functions to dissipate excess heat from the housing of the product through forced ventilation during installation a minimum distance of 100 millimeters should be left above and below the motor to provide space for the easy flow of cool air in and out of the control cabinet. The 03.S4.D2E-3011 is classified under the 230-volt class; it operates with a mains voltage that is between 180 to about 264 volts.

The line phases of the 03.S4.D2E-3011 drive controller is 1/3; also, the line frequency required by the product is measured to be about 50/60 hertz. Each unit of this product carries special markings that indicate that it has been certified to meet international standards. The rated output current that this drive controller can provide is about 2.6 amperes; also, the product operates with a stall current of about 3.2 amperes.