Product Description

The 14.F5.A1E-3AEA is a state-of-the-art frequency inverter produced by KEB Automation. This inverter carries out closed-loop speed, torque, or position control in a wide range of industrial motor designs, and it can also operate open-loop induction motors in real-time. During operation, this servo motor guarantees low motor noise with high carrier frequency. Apart from the impressive control operations provided by this frequency inverter, it also provides long-lasting protection against over-temperature and over-current damage. The power circuit of the inverter is also protected from circuiting and ground-fault damage. To maintain the quality and operation standard of this industrial servo motor, it should be protected from harsh environmental influences that can interfere with its operation. The housing design of the inverter belongs to the IP20 protection category; it is designed for vertical installation. Operators that have multiple units of this product can align them next to each other without any problem.

The integrated solid state short circuit protection provided by the 14.F5.A1E-3AEA frequency inverter does not provide any form of branch circuit protection; it is the responsibility of the operator to provide this type of protection by installing fuses according to the manufacturer’s instruction. Fast acting class J fuses are recommended for the inverter. A line choke is also required to protect the inverter from errors caused by voltage spikes and to increase the operational lifetime of the DC bus unit in the inverter.

The 14.F5.A1E-3AEA can be stored for long periods; however, if the storage time exceeds 12 months, the inverter must be started according to special instructions in the documentation of the product. The total weight of the inverter is about 5.12 kilograms. The relative humidity permissible for the operation of this product is between 5 to about 95 per cent.