Product Description

The KEB 07.58.200 frequency inverter is a robust and reliable device designed for precise motor control in industrial automation applications. The inverter is manufactured with high quality standards. It operates effectively in single phase systems within a voltage range of 180 – 264 V.

This F5 Combivert axis drive series frequency inverter has a rated current of 4.5 A and supports an ambient operating temperature range from – 10 °C to + 45 °C. The temperature can vary from – 25 °C to + 70 °C for storage. It integrates a braking module that enables limited 4-quadrant operation. The braking energy is redirected to the intermediate circuit and dissipated using a braking chopper and resistor during regenerative operation. The braking module can be installed internally or externally depending on the unit's size and voltage class. When installing within a control cabinet, ensure sufficient cooling and maintain adequate spacing to prevent overheating. The braking resistor must never be placed below the inverter to avoid heat related issues.

The 07.58.200 frequency inverter supports a wire cross section of up to 2.5 mm² and requires a mains fuse rated at 20 A for secure operation. Its frequency compatibility is 50/60 Hz ± 2 Hz that ensures adaptability to varied electrical grids. The inverter is designed for effective energy dissipation during braking with its braking resistor heating up during operation. The tripping current threshold shall be set at 200 mA or higher. This specification is intended to prevent premature tripping that may occur due to discharge currents from the inverter. Ensuring a higher tripping current minimizes the likelihood of false trips caused by transient or leakage currents. Wake Industrial offers this inverter with a replacement warranty.