Wake Industrial LLC is not an authorized distributor of this product.

14.F4.F1G-4I30

  • Rated 4.8 (6 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees

Current response time:

5 Minutes 32 Seconds

The KEB 14.F4.F1G-4I30 is part of the F4 Combivert Frequency Inverter Series and comes with forced air cooling. It operates on a 3-phase voltage of 305-440V, has a power rating of 15 KW, and an efficiency of 98%. The inverter has IP20 protection, weighs 15 kg, and communicates via RS485 interface.

Preparing your secure checkout page...

Warranty
1-year-warranty Wake Industrial Warranty
Shipping
DHL Logo FedEx Logo
UPS Logo Freight Logo
DHL Logo FedEx Logo UPS Logo Freight Logo
Payment
Visa Logo AmEx Logo
Mastercard Logo Wire transfer Logo
Visa Logo AmEx Logo Mastercard Logo Wire transfer Logo
To Speak to a sales representative for pricing and lead time:

Product Description

14.F4.F1G-4I30 is a high-performance frequency inverter. It is especially designed for speed regulation of step less 3-phase AC motors. Other types of loads must not be used with this inverter. The inverter has a compact size and supports a number of features, including IGBT power circuits, low noise when operating at high switching frequencies, integrated support for voltage, current, and temperature, noise immunity, built-in cooling fan, current regulation, and support for adjacent mounting. Under ideal operating conditions, the inverter produces 11 kVA rated output. Ideal operating conditions include nominal 400 Volts AC input, -10 to 45 degrees Celsius ambient temperature, and relative humidity below 95%. Weight of the frequency inverter is 10 kilograms. Its height is 330 millimeters, the width is 170 millimeters, and its depth is 255 millimeters.

Ingress protection rating of the 14.F4.F1G-4I30 unit is IP20, which means the device is protected against solid objects larger than 12 millimeters but offers no protection against water. For EMC, it complies with EN 61800-3 and with EN 50178 for climatic category. During operation, the upper and low ambient temperature limits are -10 degrees Celsius and 45 degrees Celsius. Cool air enters the inverter via an inlet and is forced out by the internal cooling. A heat sink is installed for further improving heat dissipation. When installed in an industrial cabinet, operators must provide 100 millimeters spacing for smooth airflow which is critical for maintenance of ambient temperature between prescribed limits. For site altitudes above 1000 meters, operators must consider 1% power reduction per each additional 100 meters. Operation of the 14.F4.F1G-4I30 at altitudes above 2000 meters is not permitted by KEB. Only trained personnel should install and operate the device.

14.F4.F1G-4I30 Technical Specifications

Voltage: 305-440V
Storage Temperature: -20°C to 70°C
Cooling Method: Forced Air Cooling
Protection Rating: IP20
Installation: Wall Mount
Communication Interface: RS485
Dimensions: 450mm x 200mm x 150mm
Current: 5.5 A
Power: 15 KW
Frequency: 50/60Hz
Phase: 3 Phase
Output Voltage: 460-500V
Output Current: 23.1 A
Efficiency: 98%
Operating Temperature: -10°C to 50°C

Frequently Asked Questions about 14.F4.F1G-4I30


Q: What is the voltage class of the resistor?

A: Voltage class of the resistor is 400 Volts.

Q: What is the protection rating?

A: Protection rating of the inverter is IP20.

Q: Which accessory is installed on the unit?

A: A braking transistor is installed on the unit.

Q: What is the required line cross section?

A: The required line cross section is 4 mm2.

Q: Which EMC standard does the inverter comply with?

A: The inverter complies with the EN 61800-3 EMC standard.

Internal Product Review

  • ‘‘14.F4.F1G-4I30 is a frequency inverter designed for speed regulation of industrial motors. With compact dimensions and numerous features, it provides operators with a powerful solution for automation solutions.’’

Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo