Wake Industrial LLC is not an authorized distributor of this product.

12.F4.S1D-4003

  • Rated 4.6 (36 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees

Current response time:

5 Minutes 23 Seconds

The 12.F4.S1D-4003 is a 4.0 kW frequency inverter with a 0-400 VAC output voltage. Manufactured by KEB and part of the F4 Combivert Frequency Inverter Series, it operates at a supply frequency of 50-60 Hz and supports a 3-phase input voltage from 380 to 480 V. It delivers an apparent power of 6.6 kVA.

Preparing your secure checkout page...

Warranty
1-year-warranty Wake Industrial Warranty
Shipping
DHL Logo FedEx Logo
UPS Logo Freight Logo
DHL Logo FedEx Logo UPS Logo Freight Logo
Payment
Visa Logo AmEx Logo
Mastercard Logo Wire transfer Logo
Visa Logo AmEx Logo Mastercard Logo Wire transfer Logo
To Speak to a sales representative for pricing and lead time:

Product Description

12.F4.S1D-4003 is a 6.6. kVA rated frequency inverter. It is designed by KEB Automation for motor control applications. The peak power rating for the motor that can be connected to the inverter is 4 kilowatts. Weight of the unit is approximately 2 kilograms. Its dimensions are 240 x 90 x 160 millimeters. Installed accessories include a filter, a brake transistor and a brake resistor. Weight of the filter is 0.9 kilograms and weight of the braking resistor is 0.9 kilograms. The compact frequency inverter has an IP20 rated enclosure which is suited to indoor use. The IP rating specifies the degree of protection provided by enclosures for electrical equipment against solid objects and liquids. The IP code consists of two digits: the first digit indicates the level of protection against solid objects and the second digit indicates the level of protection against liquids.

IP20 means the inverter is protected from accidental contact with objects that can cause harm and there is no protection against water ingress. As the inverter is not dust-tight nor protected from water ingress, and it should not be exposed to moisture or wet conditions. Input voltage rating for the 12.F4.S1D-4003 inverter is 400 Volts AC (three-phase, 50/60 Hertz). Nominal values for input and output current are 10.5 Amps and 9.5 Amps respectively. The peak short-time current rating is 17.1 Amps and the OC-tripping current value is 20.9 Amps. The 12.F4.S1D-4003 inverter is designed for 4 kilohertz switching frequency. Its nominal power loss during operation is 115 Watts. The inverter has a heat sink with internal cooling fan. During operation, the heat sink temperature should be less than or equal to 85 degrees Celsius.

12.F4.S1D-4003 Technical Specifications

Input Voltage: 380 to 480 V
Output Voltage: 0-400 VAC
Output Frequency: 0-409 Hz
Power Rating: 4.0 kW
Apparent Power: 6.6 kVA
Input Phase: 3-Phase
Supply Frequency: 50-60 Hz
Operation Status: In stock

Frequently Asked Questions about 12.F4.S1D-4003


Q: What is the weight of the inverter?

A: Weight of the inverter is 2 kilograms.

Q: What is the mounting orientation?

A: The mounting orientation is vertical.

Q: What is the protection rating of the unit?

A: Protection rating of the unit is IP20.

Q: What are the spacing recommendations?

A: KEB recommends minimum 100 millimeters spacing on the top and bottom of the unit.

Q: What is the size of the recommended power cable?

A: The recommended power cable cross section is 2.5 mm2.

Internal Product Review

  • ‘‘12.F4.S1D-4003 is a frequency inverter. It has an IP20 rated enclosure. This compact inverter provides high output power and is ideal for speed regulation for three-phase motors.’’

Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo