Product Description

12.F0.R11-0000 is a frequency inverter. It is part of the F0 series from KEB Automation>.. It is used for motor control in industrial control applications. Frequency inverters provide benefits like energy savings, smoother operation, and reduced wear and tear on equipment. By adjusting motor speed and torque in response to system demands, frequency inverters optimize performance, reduce energy consumption, and enhance the longevity of motor-driven equipment. The 12.F0.R11-0000 inverter belongs to the 400 Volts class and works with three-phase input voltages ranging from <<380 to 480 Volts. Output power rating of the converter is 6.6 kVA and its maximum output current is 9.5 Amps. The output voltage ranges from 0 Hertz to the input voltage. The output frequency range is from 0 to 408 Hertz. Motors with power ratings of up to 4 kilowatts can be used with this inverter.

Two pole and four pole motors are compatible with the frequency inverter. The 12.F0.R11-0000 inverter can handle 151 to 200% output overload for up to 30 seconds, 131 to 150% output overload for up to 2 minutes and 11 to 130% output overload for up to 5 minutes. If required, a 20 Amps mains fuse can be used for overcurrent protection. KEB recommends using cables with 2.5 mm2 cross-section for drive input power. Copper wires with this cross-section can be used for cables measuring up to 100 meters. The installation altitude without output derating is 1000 meters. For higher altitudes, the inverter output derates by 1% per 100 meters. Use of the inverter at altitudes exceeding 3000 meters is not permitted. Weight of the inverter is 4 kilograms. Its dimensions are 340 x 40 x 90 millimeters.