07F5B1B3B0A

Product Description

07F5B1B3B0A is an F5 inverter engineered by KEB. The inverter comes with a 07 unit size, F5 unit type, a standard braking transistor and does not have a feedback card. This inverter is modeled to offer the highest and most dynamic performance in the market. With the 07F5B1B3B0A you can configure analog inputs to receive voltage or current signal inputs. You can also adjust the unintended movement fault. Some of the new parameters loaded in this inverter include LX25 unintended motion distance, LX07 carrier frequency management, and LA60 analog interface selection.

To offer smooth speed regulation, it comes with features such as OEM customization without special software, stationary pole identification, large die IGBTs, and current and voltage monitoring in dynamic and static operation. It also has a direct position control, synthesized pre torque for rollback compensation. It features a 480V nominal voltage, 50/60/+/-2 Hz supply voltage frequency, and a three-phase input. For maximum results, it should be operated in relative humidity of less than 95%, stored in temperature between -25 and 70 degrees and operated in a temperature range of -10 to 45 degrees.

The 07F5B1B3B0A KEB F5 inverter features an IP20 protection degree. Its operation favors a pollution degree 2 environment and meets various industry approvals such as EN61800, EN5501, and IEC 100-4-2/-3/-4/-5/-6, among others. The inverter is designed to work with 4 or 6 pole standard motors. For other motors, you should contact the manufacturer for special frequency motors. Due to the IP 20 protection category, 07F5B1B3B0A should be mounted in a controller cabinet. It should be free from corrosive gases and dust. The mounting should be vertical with amble cooling space.