Wake Industrial LLC is not an authorized distributor of this product.

FC-280P1K5T4H2BNCXXXSXXXXAN

  • Rated 4.4 (30 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees

Current response time:

3 Minutes 41 Seconds

The Danfoss FC-280P1K5T4H2BNCXXXSXXXXAN is part of the VLT Midi Drive FC 280 series and features natural convection cooling. It offers a peak current of 73 Amps and includes an interface of RS232 and RS485. The drive operates within a voltage range of 24V to 48V DC and weighs 3.5 kg.

Preparing your secure checkout page...

Warranty
1-year-warranty Wake Industrial Warranty
Shipping
DHL Logo FedEx Logo
UPS Logo Freight Logo
DHL Logo FedEx Logo UPS Logo Freight Logo
Payment
Visa Logo AmEx Logo
Mastercard Logo Wire transfer Logo
Visa Logo AmEx Logo Mastercard Logo Wire transfer Logo
To Speak to a sales representative for pricing and lead time:

Product Description

A VLT Midi Drive FC 280 series component, the FC-280P1K5T4H2BNCXXXSXXXXAN, has been manufactured by Danfoss. Its use of natural convection cooling is one of its distinguishing characteristics. Using the laws of thermodynamics, which state that heat naturally rises and colder air falls, this technique generates a cycle of air circulation that dissipates heat from the drive's constituent parts. This passive cooling technique lowers maintenance requirements by doing away with the need for fans or liquid cooling systems. It increases energy efficiency but also determines the drive's operating environment. This drive offers versatility in various applications by operating over the voltage range of 24V DC to 48V DC, which is typical for industrial control systems. Its capability to power large loads shows its ability to manage a steady current of 40A. Its resilience to transient surges that may occur during operation is highlighted by its peak current of 73A.

This high peak current capacity is essential for applications needing quick acceleration and deceleration or those with intense inertia loads. The drive integrates an incremental encoder with Hall sensors for accurate motor control and feedback. The magnetic field produced by the spinning motor shaft is measured by Hall sensors, which use the Hall effect to provide precise information about the motor's location and speed. Maintaining precise motor control and guaranteeing the intended operation of the driven equipment depend on this feedback system. To improve communication and integration, RS232 and RS485 interfaces are included in industrial automation systems. Thanks to serial communication protocols, the drive can easily link with human-machine interfaces (HMIs), programmable logic controllers (PLCs), and other control devices. Because of its differential signaling and multi-drop capabilities, the RS485 interface is especially well-suited for industrial settings where greater communication distances and noise immunity are essential.

The FC 280 drive weighs 3.5 kg and is a good mix between size and capability. This design's relatively small weight facilitates integration and installation in control cabinets with limited space. The drive is secured from solid objects more significant than 12mm, such as fingers, according to its IP20 protection class classification; nevertheless, it is not protected against liquids. This grade emphasizes the importance of running the drive in a dry, dust-free environment to guarantee dependable performance and guard against any damage. The drive's application range is further defined by its maximum mechanical speed of 7500 rpm, which makes it appropriate for a range of industrial operations requiring high-speed operation.

FC-280P1K5T4H2BNCXXXSXXXXAN Technical Specifications

Continuous Current: 40A
Peak Current: 73A
Voltage Range: 24V DC to 48V DC
Feedback Type: Incremental encoder with Hall sensors
Cooling Type: Natural convection
Weight: 3.5 kg
Protection Class: IP20
Max. Mechanical Speed: 7500 rpm
Interface: RS232, RS485

Frequently Asked Questions about FC-280P1K5T4H2BNCXXXSXXXXAN


Q: What is the peak current of the Danfoss VLT Midi Drive FC 280 (model FC-280P1K5T4H2BNCXXXSXXXXAN)?

A: The peak current of the Danfoss VLT Midi Drive FC 280 model FC-280P1K5T4H2BNCXXXSXXXXAN is 73 Amps, which makes it suitable for handling high-demand applications while ensuring reliability during operation.

Q: What voltage range does the VLT Midi Drive FC 280 operate within?

A: The VLT Midi Drive FC 280 operates within a voltage range of 24V DC to 48V DC, providing versatility for different industrial automation systems that require specific voltage conditions.

Q: What kind of cooling system does the FC 280 drive utilize?

A: The Danfoss VLT Midi Drive FC 280 uses natural convection cooling, which allows it to operate efficiently without the need for additional cooling systems, reducing overall maintenance requirements while maintaining energy efficiency.

Q: Does the VLT Midi Drive FC 280 support communication interfaces?

A: Yes, the VLT Midi Drive FC 280 supports communication interfaces RS232 and RS485, allowing for easy integration with a variety of control systems and automation networks, offering flexibility in communication protocols.

Q: What is the weight of the FC 280 drive?

A: The FC 280 drive weighs 3.5 kg, making it relatively lightweight for its size and capabilities, which is beneficial for compact installation and handling in industrial environments.

Internal Product Review

  • ‘‘The FC 280 drive offers a good balance of functionality and size for industrial applications. The inclusion of both RS232 and RS485 interfaces provides flexibility in system integration. Natural convection cooling may limit its use in high-temperature environments, and the IP20 protection rating suggests it needs a controlled environment for optimal operation.’’

Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo