Product Description
The FC-102P5K5T4P55H3XGXXXXSXXXXA is an HVAC drive that adjusts the electric motors speed in industrial automation. Danfoss is a well-known manufacturer of high performing drives that effectively controls the frequencies of electric supply.
The VLT HVAC Drive FC 102 has the capability to support power from 0.37 kw to 1.1 Mw, that makes it suitable for wider range of applications. In this model there are three different types of EMC filter options that are H2, H3 and H4. These filters are useful for suppressing the electrical noise and also reduces interreference that may affect communication systems. Out of these 4 filters the H4 has the high level of suppression capability. The FC-102P5K5T4P55H3XGXXXXSXXXXA drive is equipped with numerical control unit that monitors and control this drive operations. There are 5 protections options available for this model, while it usually comes with IP55 category. It is safer to use in environment that contains dust particles. The operating temperature range suitable for this drive is from -10 to 50 centigrade. The model draws 11.2 amperes of current continuously while operating between the 380 to 440 voltage range.
The intermittent overload capacity of this FC-102P5K5T4P55H3XGXXXXSXXXXA drive is 19.2 amperes for duration of 60 seconds. This is highly essential for meeting higher power demand for relatively shorter period. One of the primary features of this HVAC drive is to supply 12 A of continuous current to the connected motor. This model converts 98.1 percent of its input power into useful power. The energy loss is very minimum, that makes it cost effective device. The VLT HVAC Drive FC 102 weight is 9.5 kilogram while its dimensions are 300mm x 132mm x 270mm. It is a compact designed device and is easy to install in tight environment.