Product Description
The FC-102P5K5T4 variable frequency drive specially designed for HVAC applications in Industrial automation. It is developed by Danfoss. It is widely applicable in industries for heating, refrigeration and ventilation system.
The FC-102P5K5T4 drive is suitable for moderate sized HVAC systems. It can control electric motors that have the output power rating of 5.5 kilo watts. It can accept voltage between 380 volts to 480 volts from the electric grid. It is a standard requirement in industrial and commercial applications. Under full load conditions it is capable to provide 13 amperes of current to the connected industrial motor. Its IP 55-degree rating make it a reliable device to operate in harsh environments. It is completely safeguarded against dust particles and from water jets. The drive comes with two types of control options. It either has numeric display or a graphic display. The numeric control panel gives numeric indicators for the motor operational status and settings. The graphical display is an advanced option that represents the data with graphical representation for easier monitoring. It has the ability of supplying the voltages from 200…575 volts to the motor. This means it is capable to support lower as well as higher voltage requiring motors.
The VLT HVAC Drive FC 102 has the efficiency of 97 % that means it is effectively converting the input energy into the output power. Only small amount of energy is releasing as heat when operating under high load. The drive can safely operate at the height up to 1000m without facing any loss in the performance. The FC-102P5K5T4 variable frequency drive is designed to safely handle up to 100000 amperes max fault current during a short circuit. The inclusion of Insulated gate bipolar transistors enhances the efficiency and reliability of the drive.