Product Description
The XM2201.01-01-31-31-301-NN-105N3NN embedded control made by Bosch Rexroth is available with a fatigue limit of 5g according to EN 60068-2-6 specifications. The control has an overvoltage category of 2 and a contamination level of 2. The product must not have any condensation on its surface during operation. The air surrounding the device should be free of metal vapors, acids, salts, corrosive agents, and alkaline solutions in high concentrations. The operation of the unit in small enterprises and residential areas should only be after the appropriate measures are taken to avoid radio interference. Its S20 bus has a maximum current rating of 2A.
The control encompasses a supply voltage of 24VDC with a tolerance limit of -25/30%. The product has a 2.5A internal protective fuse. The electronic components of the device are likely to get damaged due to low nominal current or polarity reversal. The unit should at all times be used with 60/75°C copper wires for UL/CSA compliant operation. It can be operated at a maximum altitude of 4,700m above sea level as per DIN 60204 specifications. This product features standard housing. The device must be installed horizontally if the associated mounting rail is wall mounted. The connection of its power connector is intended to be done with cables that have a cross-section of 1.5mm2 or 16AWG.
The embedded control allows setup without incorporating electric isolation between the peripheral supply and internal logic. The product is commissioned by turning it ON after it is mounted and the voltage supply is connected at the XD1 connector. The device may malfunction if it is switched OFF during the firmware initialization process. It helps in the fast processing of control tasks. The errors of the unit are diagnosed with an operation mode switch, a Reset button, and multiple LEDs. Thisembeddedcontrol with warranty backing for one year can be dispatched through our trustworthy logistics network.
Wake Industrial Warranty
