Product Description
Bosch Rexroth is mainly concerned about its customer’s satisfaction through its affordable products such as controllers, servo motors, and frequency converters. These products are widely used in several motion control systems.
The XM2100.01-01-31-31-301-NN-106N3NN model is developed to execute control tasks in various motion control technologies. The XM21 control reflects the modern technology of Rexroth Indramat and it is widely used to control several motion control systems such as woodworking machines, machine tools, printing machines, and mounting systems. The control should only be operated with the accessories and parts allowed by the supplier. The XM21 control provides maintenance-free operations when operated under permissible mounting conditions, operating temperature, and protection category. The model takes electrical connection from the 24 VDC power supply and the current requirement of the controller is 1 A. The model comes with an Intel E620T processor for the fast processing of control tasks. The model comes with a minimum 128 kB remanent memory and its housing comes in a standard design. For networking, a 1 GB Ethernet interface is installed in this model and 2 USB ports are placed for the USB host and USB device. The model can be customized by installing various extension cards according to the specified function.
The model XM2100.01-01-31-31-301-NN-106N3NN comes under IP20 protection rating. The total weight of the control is approximately 0.38 kg, including the weight of the power connector. The minimum clearance of 100 mm should be maintained at the top and bottom of the unit to provide sufficient room for airflow. During installation, make sure that the LED displays on the operating panels are not covered. A reset button and several PEDs are placed at the front of the XM21 control for error diagnostic. The model can operate, without derating, at the maximum temperature of +60 degree Celsius. The basic operating system of the model consists of PLC, MOT, TEC, and HYD. It is mainly used in Indramat motion logic control operations and it communicates via OPC UA and OCI interfaces. Get this product XM2100.01-01-31-31-301-NN-106N3NN today from Wake Industrial. This unit can be shipped globally with a one-year warranty period from Wake Industrial.
Wake Industrial Warranty
