Product Description
Bosch Rexroth is extremely concerned about their customer’s satisfaction through their high-quality products such as controls, servo drives, and frequency converters. These products are widely used in different automation industries.
The XM2100.01-01-31-31-001-NN-102N3NN model consists on the basis of PLC, MOT, and TEC. The model provides high functional reliability when used in conjunction with the accessories prescribed by the Rexroth Indramat. The IndraControl XM21 control takes a 24VDC electrical connection through the a1 and a2 terminals of the power connector (XD1 plug). For fault and error diagnostics, several PEDs are installed in this unit and an operation mode switch is also placed to operate the XM21 control. The ambient temperature range for this control is -25 to +60 degree Celsius and it can be mounted at the maximum height of 4700 meters above sea level. For performing quick control functions the model is equipped with an Atom E620T processor (600 MHz CPU frequency) and a 512 MD DRAM is also installed for storing the operating parameters of the control. The IndraControl XM21 control is used in various industrial applications such as printing machines, machine tools, mounting systems, and woodworking machines. Before commissioning, the XM21 control should be configured and programmed by using “IndraWorks” engineering software.
The model XM2100.01-01-31-31-001-NN-102N3NN is capable to connect with three extension modules. The model can only be used in an area with a minimum pollution degree 2. The XM21 control uses the SERCOS master interface for performing real-time communication between the control and the drive modules. The remanent memory of the module is 128 kB and a minimum 1 GB SD card can be installed in this unit. The control comes in the Bosch Rexroth standard housing and is mainly used with the IndraMotion MLC (motion control system). The communication has been carried out by OPC UA and OCI interfaces. The single control can provide connection to almost 63 S20 I/O units and the current requirement for these modules is 2 A. The enclosure comes under the IP20 protection rating. Get this XM21 control from Wake Industrial and receive it at your doorstep along with a one-year replacement warranty.
Wake Industrial Warranty
