Product Description

The VT-HNC100-2-20-W-16-I-0 is an advanced digital axes controller designed under ideal industrial conditions by Bosch Rexroth Indramat. This unique product is manufactured for the accurate control of hydraulic axes used in several production and processing systems. It can simultaneously control the speed, pressure output, velocity, and voltage used by two hydraulic presses. The product is also designed for use in rough industrial environments. Its enclosure is made from a strong metallic material that can comfortably withstand mechanical vibrations, shocks, and external interference that will be considered damaging to conventional industrial machines. The VT-HNC100-2-20-W-16-I-0 is also intended to be used indoors as part of an industrial machine or operation system. It does not contain any air blower, and it generates very little noise during operation. This product is relevant in several industrial applications, including transfer lines, special machines, machine tools, and rail-bound vehicles.

The VT-HNC100-2-20-W-16-I-0 digital axes controller has a housing that is built for direct wall installation. For optimum connection with peripheral devices, there are about 16 digital inputs/outputs integrated into the housing of this product. The Bus interface present on the VT-HNC100-2-20-W-16-I-0 controller is the InterBUS-S; this bus is used for communication with a higher logic controller. The internal processor used with this controller is a 16/32 bit MC688376 processor. The total power consumption of this product is about 8 watts

There is a 12-month warranty provided by Wake Industrial on this product. The VT-HNC100-2-20-W-16-I-0 digital axes controller has a width of 106.5 millimeters, a Height of 155 millimeters and a depth of about 203 millimeters. The permissible operating temperature range for this product is between 0 to about 50 degrees Celsius. The product also has a total weight of 1.2 kilograms.