Product Description
The Bosch Rexroth VT-HNC100-1-1X/133/DGM101 is a digital axis control from the HNC100 series of products. It is a programmable device designed for a closed-loop controlled axis. Operation of the VT-HNC100-1-1X/133/DGM101 depends on data sets. The combination of user program and data sets is called a project. Operators create the data sets on computer software (WIN-PED) and then transfer the data sets to the NC control. The task to be performed by the NC control are first defined and stored in a sequence chart. The functions of the sequence chart are implemented in the form of NC commands. The machine data and parameters of NC data are then defined. The data is then transferred to the NC control. Finally the settings and program sequences are optimized on the machine. The VT-HNC100-1-1X/133/DGM101 features a built-in RS-232 interface for serial communication.
The serial interface is capable of data transfer at up to 9.6 kilobaud. The VT-HNC100-1-1X/133/DGM101 requires DC input at 18 to 36 Volts. The power supply connection should be as short as possible. The supply and return lines (+24 V/GND) should be passed together. Load lines of two individual wires (e.g. voltage supply) are to be passed in a parallel or drilled form. There are no special transport instructions for this product. Operators must, however, observe the safety notes in the product documentation and comply with the ambient conditions for storage and transport which are detailed in the technical data. Only genuine product packaging should be used for storage. The admissible storage temperature for the VT-HNC100-1-1X/133/DGM101 is -20 to 70 degrees Celsius. The VT-HNC100-1-1X/133/DGM101 unit should be protected from dust and humidity during storage and during operation. This unit can be shipped globally with a one-year warranty period from Wake Industrial.
Wake Industrial Warranty
