VT-HACD-DTC-11-V2-1-C-0

Product Description

Bosch Rexroth offers an extensive selection of products that may fulfill the requirements of each client, from small companies to major industrial enterprises. 

The VT-HACD-DTC-11-V2-1-C-0 model features a 64-pole male multipoint connection according to DIN 41612 and is a Rexroth Bosch Group basic digital controller card. The card allows for position control through force control or overlaid pressure. The analog current inputs on the VT digital controller card provide an input current range of 0 to 20 mA or 4 to 20 mA with a resolution of 5 microamperes. The controller card is devoid of both a bus connection and a valve output stage. Modification of the analog outputs is possible through both amplification and adjustment. It is possible to configure the digital outputs to set the internal flag and the error flag. The card's fuse contains a 4 A time lag. The device has a minimum working voltage of 21 V and a maximum operating voltage of 30 V. The VT digital controller card can monitor several aspects, including memory, the 10 V reference voltage, internal voltages, and supply voltage. The model must be operated within a temperature range of 0 to +50 degrees Celsius and weighs 0.2 kilos.

The model VT-HACD-DTC-11-V2-1-C-0 has an SSI digital position transducer with an RS485 line receiver. When the first analog output is set as voltage output, the load resistance of the card is 1 kiloohm. On its soldering side, the front plate has a width of 0.2 inches. The physical dimensions of the model (VT-HACD-DTC-11-V2-1-C-0) are 100 x 160 mm, and it must be kept between -20 and +70 degrees Celsius. The scan rate of the model is 2 ms, and its current consumption is 150 mA.