Product Description
The Bosch Rexroth VT-HACD-522-1X-V0-EFF00404 digital command value card or controller card must be kept away from dust and moisture. This card handling should be done after discharging the static voltage. The product has an OK LED on its front panel. The device operates at a maximum voltage rating of 24VDC. The unit portrays a D-Sub socket for the RS 232 serial interface. Its control electronics must not be positioned in close proximity to electromagnetic sources of interference. The card needs to be held by its front panel when it is mounted inside the cardholder. This product has two tightening screws on the front panel that must be tightened after the mounting is done.
The device comprises a Type G 64-pin edge connector that is designed in adherence with DIN 41612 specifications. The unit deploys a local bus installation to connect with cards of the same series. It is necessary to associate each such card with a bus address. The control startup has to be established after ensuring that the cables used for connection have no form of defect. The product carried out a self, internal function test after the start-up is done. This device start-up is possible only after making sure that the BODAC software is installed. This command value card is available with a year’s Wake Industrial warranty.
The product portrays a four-digit display. The device has separate serial and PROFIBUS connectors. The unit has + and - LEDs to indicate the positive or negative sign when displaying the parameters. Its PC software has to be bought separately. The card is connected to external test instruments through the diagnostics test jacks. This product permits the setting of the configuration mode from run mode. The device can cause uncontrolled system operation if the configuration of the analog input is changed incorrectly. This control dispatch is done in custom military-grade packaging.
Wake Industrial Warranty
