VT 3002

Product Description

The VT 3002 is an electronic card stand with a connector base from the Rexroth Bosch Group. The 2X component series card holder can be used to install and wire separate Euro-card format electronic cards such as in control cabinets or switching cabinets. The holder has push buttons on either side to release an amplifier board without causing any damage to the faceplate of an amplifier due to stress. The card stand is compatible with the manufacturer’s VT 3000 series of electronic analog amplifiers.

The card holder is screwed on to a DIN rail using individual screw terminals or snapped on to the same. It can also be mounted vertically on to a DIN rail using an additional adaptor. The holder features a stable and rugged base to remain steady and in position without moving out of place. The Rexroth Bosh Group can send the card stand worldwide using any one of their wide range of delivery partners. It comes with a one-year warranty period. The electronic card stand features a lever actuation to lock and release the amplifier card. The single Euro-format unit weighs 0.5 KGwhile the double counterpart weighs 0.8 KG

The electronic card stand is available in both 32-pin Form D and 48-pin Form F connection formats. The stand features a maximum of 48VDC/VAC terminal voltage. The stand supports an ambient operating temperature range between -20° and +70°C. For installation, the yellow operating levers must be pushed down as much as possible and the card must be inserted completely. The inserted card can be removed from the holder only by actuating the locking lever repeatedly. For the cable connections, the connection web in between both the card guide rails can be disconnected or fixed on the other side of any of the rails. The plug-in screw terminals encompass a maximum 4mm² connection cross-section.