VMA 21KB 001-D

Product Description

The VMA 21KB 001-D power supply module from Bosch Rexroth is used with the manufacturer’s low voltage motors. The motor is designed as per VDE 0530/EN 60034 standards and is used in industrial or commercial systems. The Servodyn D module is equipped with various status displays. It is one of the several power supply modules in the VM series. This unit is integrated with an internal ballast switch. This product comes with two power slots to accommodate two power supplies at a time. The device can be replaced easily without having to turn off the complete system to do this.

The unit is connected to a 3 x 400VAC to 460VAC supply voltage with a tolerance of +/-10% via a line wiring module. The device encompasses standard air cooling. It can be used in combination with DM…K modules from the same manufacturer. The product requires an NAA module and a backplane module for its installation. Its DC link is achieved using the C and D conduction bars present on its front side. The power supply module has a width of 100mm. The line wiring module is located to the left of the power supply module.

There must be a distance of at least 25mm between the product and the line wiring module. The power supply module features a fuse with 20A current rating and 32V voltage rating. The DC link connection is located at the bottom of the product. The AE LED glows when the X06.7 connector has a 24V voltage connection. The device should be dismounted only after waiting for five minutes after use so that the discharge takes place completely. The power supply module can be shipped to any destination of your preference with a one-year warranty period from Wake Industrial.