VEH30.1BJN-128ET-G3D-128-NS-NN-FW

Product Description

The VEH30.1BJN-128ET-G3D-128-NS-NN-FW embedded terminal by Bosch Rexroth has a RAL 7035 light gray colored front panel with IP 65 degree of protection according to IEC / EN 60529 specifications. The keypad comprises 34 embossed keys. The product comes equipped with a 128MB compact flash card. The device encompasses a voltage supply of 24VDC and an input voltage range of 19V to 30V. The angled connector of this unit must be connected at an angle of 45° to the flange of the connection module. The terminal should be commissioned after making sure that the safety devices are properly installed. It must be operated only as defined appropriate by the manufacturer.

This embedded terminal should not be used when the maximum temperature is very high. The installation and startup of the product must take place only after reading the associated documentation. The device comes with a 300MHz Geode system configuration. It comes integrated with a STOP button. The firmware for this unit must be ordered as a separate subitem. The terminal has a maximum input current of 0.7A and a maximum inrush current of 3A for 24V nominal voltage rating. The STOP button has a nominal voltage rating of 24VDC/30VAC. It is protected externally by a 2A fuse with a time lag.

The product supports an ambient operating temperature from as low as 5°C to as high as 40°C in compliance with EN 50178 specifications. The device weighs approximately 2.6kg. It encompasses a name plate on its rear that features several details such as the part number, serial number and ordering designation of the firmware. The backlight of the unit has a limited lifetime of about 20,000 operating hours. The product comes in a size of 270 x 290.54 mm (W x H). The device can be mounted on a vertical surface. It can also be placed on the forearm and supported against the body. This embedded terminal can be shipped to any worldwide destination with a year's warranty from Wake Industrial.