VDP80.1FHN-C1-NN-EN

Product Description

The installation of the VDP80.1FHN-C1-NN-EN Bosch Rexroth machine operator panel must always be done inside a sealed as well as dustproof housing. This housing should be impermeable to water. The operator panel is designed such that it can be used at an ambient temperature ranging from 0°C to 45°C. The components of the product have to be placed inside the housing so that they are easily accessible for maintenance work. The shielding of its connecting cable and the jacket of the corresponding cable connector has to be soldered to each other. The backlight gets reduced by half after a service life of 50 hours.

The 10.4-inch LCD of this device produces 262.144 colors. The product must be used with 75°C insulated copper wires for the operation to be as per UL standards. There should be no condensation on the device during operation. Its J9 connector is a four-pin connector that serves as a USB interface. The unit is used in machine tools for CNC milling. The housing of this HMI panel must be large enough for heat dissipation. The temperature difference inside and outside the housing when the product is in use must not exceed 10°C. The operator display has a one-year Wake Industrial warranty.

The operator panel must always be used only with the parts and accessories produced by the manufacturer. The product must not be operated under extreme maximum temperatures. This device may pose a risk of injury if its battery is handled improperly. It can cause property damage or bodily injury if it is not operated in compliance with the safety instructions. The unit has a 2A current rating and 24VDC +/-10% voltage rating. The doors of the housing, as well as the cable outputs of the panel, must be applied with sealant. The panel can be delivered to your address with warranty support for one year.