Product Description
The VDP15.3GAN-D2-NN-CH VDP series screen panel features a 15 line code and a 3 design code. This screen panel has an overvoltage category of 2 and a contamination level of 2. The air surrounding the product must be free of dust and electrically conductive contaminants. The housing of the device should comply with IP 54 degree of protection as per DIN VDE 0470-1 specifications. The unit features two USB ports. It makes use of a 24VDC power supply unit in adherence to DIN EN 60742 specifications. The panel is designed to operate between 0°C and 50°C.
The backlight renders only 50% of the original brightness after its service life is exceeded. This product has a minimum relative humidity of 5% and a maximum relative humidity of 85% during operation as well as storage. The device is CE Certified and cULus Listed. There must be a distance of 50mm on all sides between the housing and device for cable routing and sufficient cooling. The aluminum housing should have sufficient flatness and mechanical strength. It must also be free of impurities. The panel must always be inserted into the cutout from its front. It may get damaged because of incorrect mounting torque.
The screen panel encompasses a power loss of approximately 24W and current consumption of nearly 1A. The maximum length of the cables used with the product must not be more than 70 meters to avoid malfunctioning. The display becomes dark if the device features a direct connection to a 24V supply voltage without a UPS. The cables used to connect the unit must be kept apart as much as possible to avoid interference. The CDI cables of the panel must always be shielded. This device can be put to use directly without commissioning. The screen panel can be sent to any destination safely with a one-year Wake Industrial warranty.
Wake Industrial Warranty
