Product Description
Bosch Rexroth provides services in manufacturing and development of energy-efficient equipment for industrial automation. The company’s products such as frequency converters, small operator terminals, servo motors and controls are widely used in the market.
The VCP20.2DUN-003-SR-NN-PW model comes with several interfaces according to the requirements. The model uses 10/100 Base-T Ethernet interface for local area network (LAN) connection and it is located on the side of the operating device which takes connection through a small RJ45 female connector. The RS485 and RS232c interfaces are used in this model for point-to-point and multi-point connection through a 25 pin D-SUB female connector. Two host interfaces are also available on the operating device. The small operator terminal VCP 20 operates at 24V DC voltage supplied by the power supply at the typical power consumption of 0.25 A. The small operator terminal VCP 20 comes with a 3MB application memory and 16 MB flash, the CPU used in this model is RISC ARM9 having 200 MHz of clock frequency. The Window CE operating system is installed on the small operator terminal.
The model VCP20.2DUN-003-SR-NN-PW can be mounted in any required direction and its front panel is protected by IP 65 protection class whereas its rear part holds the IP 20 protection category. The VCP 20 is widely used in handling and assembly systems, packaging systems, and machine tools. The net weight of the model is approximately 500 grams and its body is manufactured of galvanized steel (enclosure) and anodized aluminum (front panel). The front panel of the device consists of an FSTN 5.7 inches display and 40 keys membrane keyboard. The model comes with a preloaded firmware which means you don’t need to order it separately and the permissible temperature range for the device is +5 to +45 degree Celsius at the maximum altitude of 2000 meters above sea level according to DIN EN 61131-2. This unit can be shipped globally with a one-year warranty period from Wake Industrial.