Product Description
The VCP11.2ECN-004-NN-WN-PW small operator terminal is available with preloaded firmware. This Bosch Rexroth operator terminal should always be used in its original state without any structural changes. The product is used to operate as well as control machines and installations. The device is widely deployed in machine tools. It must not be operated when the temperature is extremely high. The unit should not be used for applications other than those intended by the manufacturer. The operation of the terminal must happen only if the application it is used for complies with the national EMC regulations. The product comes with 11 line code.
The terminal features a mounting cutout of 88 x 122mm (H x W). The device comes with a 4-wire technology analog resistive touchscreen. The touchscreen comprises of a FSTN display with 320 x 240 pixels resolution. It has a reading angle of 90°. The unit has a serial interface and 4MB application memory. The enclosure of the product is made of galvanized steel sheet. This device utilizes a 24VDC supply voltage with a 10% maximum residual ripple. It has a RISC ARM9 central processing unit with a clocking frequency of 200MHz. The operator terminal must be stored and transported between a temperature range of -20°C and 60°C.
The device must have a clearance distance of at least 30mm surrounding it during installation for adequate air circulation during operation. It must be ensured that the grub screws related to the mounting brackets are tightened uniformly so that the degree of protection is not affected. The touchscreen should not be operated using sharp or pointed objects. The Ethernet interface must always be connected using a CAT6+ twisted-pair cable. The unit comes with diagnostic LEDs embedded on its side. The device has a year’s warranty and can be sent to any address of your choice irrespective of the country where it has to be delivered.
Wake Industrial Warranty
