VCP11.2ECN-003-NN-NN-PW

Product Description

The VCP11.2ECN-003-NN-NN-PW is a 3.5” IndraControl VCP11 graphics-oriented terminal produced by Bosch Rexroth. The total weight of this device is 500 g. Its touchscreen is a 4-wire analogue resistive screen type. The display on the VCP11.2EBN-003-NN-NN-PW is of the TFT type, with a pixel resolution of 320 x 240 and 5 shades of grey colour. Also, the reading angle of the display is 80^o, and its contrast setting is temperature-saturated. A 30,000-hour half-life rating is allocated to the backlighting of this device. The brightness of the display on the VCP11.2EBN-003-NN-NN-PW is rated at 90 cd/m², and the display area measures 57.6 x 76.8 mm.

The rated supply voltage of this IndraControl VCP terminal is 24 Volts (Direct Current), and its residual ripple is 10 % (max.). The minimum and maximum voltage rating is within the range 18 ≤ V ≤ 30. The typical power consumption at a nominal voltage (24 VDC) has a current rating of 0.25 A, and at a max. of 30 Volts, the current rating is 0.35 A. The power rating of the connected load is 6 W. The VCP11.2EBN-003-NN-NN-PW utilizes integrated protection against polarity reversal. The Universal Serial Bus (USB) interface on this IndraControl model has a current output rated at 100 mA/output (max.).

This device features a pre-installed firmware, RJ45 female port, USB type-A female connector, 9 and 25 pins D-SUB male/female connector strips, 5-Pin Phoenix COMBICON male connector strip and a male/female 3-Pin Phoenix COMBICON connector strips. The VCP11.2EBN-003-NN-NN-PW also come with a RAM of 3 MB and ROM of 16 MB. There is no upgrade option for the display and front panel of this device. This unit can be shipped globally with a one-year warranty period from Wake Industrial.