TVM 2.4-050-W1-115-220

Product Description

The TVM 2.4-050-W1-115-220 power supply module produced by Bosch Rexroth has a factory assigned three-phase input voltage and nominal DC bus voltage. Its inbuilt blower prevents the product from getting overheated when in use. The device comes with a couple of line input fuses and a control voltage fuse. The H3 and H4 LEDs assist in fault diagnoses of the device. The grounding rail of the unit helps to connect more than one module at a time. The module features a power rectifier integration to produce the DC bus voltage needed to power the related drives from the AC line voltage.

The drive energy stored in the DC bus circuit can be used later for acceleration. The front panel of this device that has the RESET button is housed above the diagnostic LEDs. The auxiliary capacitance that is attached to this unit should be equipped with 15% overvoltage support if there is no regulated bus. The module features a configuration code of 4 and a series code of 2. The modular structure of this product makes the replacement easy if it is needed. The drives powered by the device are compatible with the manufacturer’s servomotors and controls. This combination functions as a motion control system.

The connected drives stop operating and come to standstill if the dynamic braking feature is triggered by the ready-state contact because a problem is encountered. The module comes with a 450W continuous regenerative power rating. This product can be reset if there is an overload on the bleeder. The device features three terminals for the AC power input connection and two terminals for its DC bus connection on the X9 connector. The bleeder resistor of the unit absorbs the regenerated energy when the drives function like a generator. The module is associated with backup support for a period of one year. It is possible to deliver the product to your address in any country.