Product Description

The TDM 1.2-030-300W1 is a servo drive module designed by Bosch Rexroth Indramat to ensure high accuracy control in the industrial servo system. This servo drive is designed by highly trained engineers to be flexible in operation, it is well suited for use in a wide range of industrial machines such as transfer lines, automation systems, as well as production machines in the automotive industry. The servo drive operates with a MOD plug-in programming module which is used to match the drive module to the motor type. The use of this programming module ensures that the drive is put into service without time-consuming optimization and adjustments, also during servicing the unit can be quickly replaced on site by personnel without special training since no adjustments and matching is required.

The TDM 1.2-030-300W1 servo drive module is designed according to the IP10 protection category, to ensure optimum protection during operation, it should be installed in a control cabinet that can guarantee the safety of the servo drive against hazards. The continuous input current required by the TDM 1.2-030-300W1 servo drive module during operation is about 30 amperes, the peak input current suited for this servo drive module is also 30 amperes. The link circuit DC voltage required by this servo drive during operation is about 300 volts. During operation, the TDM 1.2-030-300W1 servo drive module requires a continuous power of 9 kilowatts, also the power loss by the module at continuous current is about 190 watts.

The TDM 1.2-030-300W1 industrial servo drive module regulates its operation temperature through a built-in fan. This fan generates the air current that dissipates excess heat away from the servo amplifier.