Product Description

The SR-A1.0012.060-10.000 is a servo motor designed for industrial applications. This series of motors are compatible with Servodyn-D inverters. The function of the inverter is to convert DC to AC output with desired amplitude and frequency. The inverter monitors real-time feedback from the servo motor, which allows control algorithms to determine the output amplitude and frequency which is required to achieve the desired motor speed and position. SR series motors are equipped with a resolver, which is a mechanical feedback device, for speed and position feedback. The closed loop control system formed by the inverter and the servo motor is a critical component of industrial automation systems that require precise and accurate motor control.

Speed rating of the SR-A1.0012.060-10.000 motor is 6000 RPM. The motor has a smooth shaft without mating connector. Locked-rotor torque and current of the motor are 1.2 Nm and 1.9 Amps respectively. These values are available when the ambient temperature is less than 40 degrees Celsius and when the site elevation is less than 1000 meters. SR-A1.0012.060-10.000 is a flange-mounted motor and its flange size is 70 millimeters. The shaft diameter is 11 millimeters and the shaft length is 23 millimeters. Length of the servo motor is approximately 176 millimeters and its weight is 1.9 kilograms. Protection rating of the servo motor is IP67, which indicates superior dust and moisture protection. With this rating, the motor can be used in a wide range of operating environments. The location of the ball bearings is on the output side and their minimum service life is 20,000 hours.