Product Description

The SF-A2.0026.030-14.054 is a high performance and precise servomotor designed for motor control applications. It is made by Bosch Rexroth Indramat specifically to deliver effective results in applications related to Industrial Automation.

The SF-A2.0026.030-14.054 servomotor has a nominal speed that is 3000 RPM operating under high load. The device is able to generate 1.7Nm torque per supplying one ampere current and functioning at 40°C temperature. The motor is featured with an encoder, that gives feedback regarding the motor position to the controller. The encoder is able to provide 20 angular seconds precision per 8 million incr/rev. The shaft of the SF-A2.0026.030 motor is cylindrical and is aligned with the DIN 748 standard. This feature makes the device compatible with the typical mechanical systems and does not need any keyway for connection. The motor has ball bearings that support the shaft and also reduces the friction. The bearings are designed for handling radial and axial loads and its minimum service life to operate is 20000 hours. The SF servomotor and its encoder have a moment of inertia calibrated at 1.5 × 10⁻⁴ kgm². This lower value means the motor can easily accelerates and decelerates and that too rapidly. It only generates 58 decibel of noise level up to distance of one meter from the motor. The noise emissions are very low and follow the EN 60034-T9 standards.

The SF-A2.0026.030-14.054 servomotor has a plug-in connection. This empowers the system of the power and encoder to be easily connected to it. It also comes with an electronic rating plate allowing the drive controller for optimizing itself automatically for the motor. The inverter enhances the efficiency and performance by modifying its settings according to the characteristics of the motor.