Wake Industrial LLC is not an authorized distributor of this product.

SE-D1.010.030-14.026

  • Rated 4.6 (27 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees

Current response time:

4 Minutes 13 Seconds

The SE-D1.010.030-14.026 is a 6-kilogram servo motor with a power loss of 25 watts. Manufactured by Bosch Rexroth Indramat, this motor belongs to the SE Servo Motor Series and boasts Class A EMC level. It operates at a frequency of 50/60 Hz with a rated leakage current of 35 mA.

Preparing your secure checkout page...

Warranty
1-year-warranty Wake Industrial Warranty
Shipping
DHL Logo FedEx Logo
UPS Logo Freight Logo
DHL Logo FedEx Logo UPS Logo Freight Logo
Payment
Visa Logo AmEx Logo
Mastercard Logo Wire transfer Logo
Visa Logo AmEx Logo Mastercard Logo Wire transfer Logo
To Speak to a sales representative for pricing and lead time:

Product Description

The SE-D1.010.030-14.026 servo motor is advanced servo motor manufactured by well trained engineers of the reputable Bosch Rexroth Indramat. The motor is a power efficient device, it operates with an input current of 1 amperes when at standstill, the maximum input current that can be used with the motor is as high as 4.5 amperes. The amount of protection provided by the enclosure of this industrial is high enough to prevent penetration of solid substances and liquids. The motor design is flexible enough for direct installation into any position in the servo system. The ramp-up time of this industrial motor is measured to be about 12 milliseconds, the nominal operating speed of the motor is about 3000 revolutions per minute.

The SE-D1.010.030-14.026 is a compact motor with a total weight of 2.9 kilograms. The voltage constant of the motor during operation 115 volts per 1000 revolutions per minute, while the electronic time constant about 1.36 milliseconds. There is a holding brake designed to support any load present on the shaft of the motor when the motor is at standstill. The flange of the motor as diameter of 72 millimeters, the output shaft has a diameter of 11 x 23 millimeters. The maximum length of this industrial motor is about 211.5 millimeters.

The holding break present on the SE-D1.010.030-14.026 produces an holding torque 1.5 newton meters, the supply voltage required by the holding brake is 24 volts, while the nominal current is about 0.38 amperes. The holding brake has a moment of inertia of 0.012 kilograms per meter square. The holding has a total weight of 0.21 kilograms. Wake Industrial provides a 12 month warranty of this servo motor.

SE-D1.010.030-14.026 Technical Specifications

Rated Power: 5.5 kW
Ramp-up time: 12ms
Torque constant: 1.00Nm/A
Winding resistance: 67/4 Ohms
Winding Inductance: 91.4mH
Electronic Time constant: 1.36ms
Mechanical time constant: 5.1ms
Voltage: 400 V
Frequency: 50 Hz
Efficiency: 95%
Operating Temperature: -10°C to +40°C
Protection: IP65
Static torque: 1.0Nm
Maximum Torque: 3.6Nm
Nominal speed: 3000rpm

Frequently Asked Questions about SE-D1.010.030-14.026


Q: What type of holding brake is present in the SE-D1.010.030-14.026?

A: The holding brake is a permanent magnet brake. It is free of backlash and energy efficient.

Q: What does the commutation sensor in the SE-D1.010.030-14.026 do?

A: The commutation sensor controls the commutation of the phase currents in the inverter connected to the motor.

Q: Can the SE-D1.010.030-14.026 motor withstand high ambient temperature?

A: The maximum permissible ambient temperature range for this product is between 0 to 40 degrees.

Q: What type of protection does the housing of the SE-D1.010.030-14.026 provides?

A: The SE-D1.010.030-14.026 is an IP65 device. Its is protected from dust and liquid interference.

Q: How long is the service life of the bearings in the SE-D1.010.030-14.026?

A: The bearings in the SE-D1.010.030-14.026 have a service life measured to be about 20,000 hours.

Internal Product Review

  • ‘‘The SE-D1.010.030-14.026 has a compact housing design that provides enough protection against harsh environmental conditions. It is easy to install and does not require any maintenance operation. \’’

Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo