Product Description

The SE-C4.210.030-10.011 is one of Bosch Rexroth Indramat most popular products. It is a servo motor that can comfortably meet the kinetic energy requirements of industrial machines while maintaining a low power consumption level. This servo motor has a strong housing unit that is completely water proof and resistant to dust over extended time. The nominal operating speed of this servo motor under normal conditions is about 3000 revolutions per minute, at standstill the motor operates with an input current of 23 amperes. The peak current that can be used by this servo motor is 158 amperes. After the SE-C4.210.030-10.011 servo motor is integrated and plugged-in, it takes about 32 milliseconds for the motor to get up to speed. The static torque of this motor design is 21 newton meters, while the maximum torque is about 57.4 newton meters.

The SE-C4.210.030-10.011 servo belongs to the insulation class F according to with VDE 0530. To protect this servo motor from over temperature damage, an NTC thermistor is installed in the winding of the motor. This thermistor is sensitive to temperature and is monitored by the inverter to keep a tab on the temperature status of the motor. The position, speed, and general functioning of this servo motor is converter into digital signals by a brushless tachogenerator, and transmitted to the connected inverter through a feedback cable.

The SE-C4.210.030-10.011 servo motor is a standard motor without any mating connector, keyway or feather key. The shaft in the motor can support relatively high load without problem. This servo motor is not equipped with an air blower, instead cooling is done through natural convection and air blower. Throughout operation, this motor is not expected to produce a noise higher than 58 decibels.