Product Description

The SD-B3.050.030-14.000 Bosch Rexroth permanent-field servomotor supports right-angled as well as straight style connectors. This motor should be disconnected from the power supply when its installation or connection work is carried out. The product is connected to three terminals on the inverter. This device has restricted operation when it is not used with an approved inverter. The unit has a connection cross-section of 1.5 mm2 in the mating connector. Its power connection socket has six pins. This motor has no disk brake.

The product comprises braking resistors that stop it with maximum current in the shortest possible time. This device supports a maximum length of 100 m for the tacho cable. The unit must be checked for precise repositioning of the tacho board when a replacement is done because of the fork-style light barriers. It has an overall length of 392 mm.

This servomotor has no brushes for its tacho. The product supports electronic commutation. This device cannot be operated on a standalone basis without the inverter. The unit is highlighted by maintenance-free operation when it is used as intended. It encompasses a shaft with a featherkey and keyway. This motor has vibration quality level N as per DIN ISO 2373 specifications. The product has no customization. This device has an IP 54 protection class with the prescribed cable diameter and mated connector. The unit has a peak current rating of 21.2 A at 20 °C. It is necessary to choose the supporting inverter based on a matched inverter current and motor current.