RZS01.1-6-099

Product Description

The RZS01.1-6-099 sinusoidal filter from Bosch Rexroth is an important accessory in the manufacturer’s RD 500 drive system. This filter is used with the motor in the corresponding drive system. The product belongs to the RZS product group of such filters. The device is primarily used to operate the associated motor with sine shaped voltage and current values. The unit incorporates a switching principle. It has a pulse frequency of 8kHz. This product may get damaged due to overloading of its components or a lower pulse frequency. The filtering device is equipped with a type plate that highlights its designation as well as key technical details.

The sinusoidal filter has an overall length of 305mm. The product is associated with a line code of 01. This device has three input terminals and three output terminals. It is recommended that the nominal current of the output filter does not increase beyond the specified value. The unit is also termed or known as a sine wave filter. The filter helps in lowering the noise produced by the motor. The product generates a sinusoidal waveform for the motor and prevents it from getting overheated. The device has the capability of lowering high-frequency transient emissions. The RZS01.1-6-099 filter is backed by a one-year warranty.

The filter tends to cause voltage reduction that is based on the load current. The device must be worked on only after half an hour of turning it OFF so that its capacitors get discharged fully. The protective conductor of the unit must be connected permanently to the line supply. Its inputs are connected to the outputs of the frequency converter, connected in the same drive system. The product supports maximum line length of 400m as the total length of all its connected motor cables. The filter can be sent to any address across the globe based on your preference.