RZC01.2-6N-022-F-23

Product Description

The Bosch RZC01.2-6N-022-F-23 is a chemistry module. It is available as an accessory for RD 500 series digital drives. AC drive converters and chemistry modules have the same housing dimensions. For this reason the chemistry modules can be mounted on the side of, below or above the AC drive converter. The RZC01.2-6N-022-F-23 is designed for use with 18.5 kilowatt rated drive converters. The rated current for the module is 35 Amps. The maximum output frequency is 200 Hertz. The input rating of the module is 400 Volts AC ±15% (three-phase). A NAMUR terminal strip is not available on the module. The module supports 24 Volts stand-by power with filter current feedback. The RZC01.2-6N-022-F-23 has been prepared for IP23 cabinet mounting. A cable with maximum 400 meters length can be used with the module.

The RZC01.2-6N-022-F-23 has noise suppression level rating of A1 as per EN 55011. The module has interference immunity that complies with EN 50082-2. For operation, the optimal ambient temperature level 0 to 40 degrees Celsius. At bearing assembly, the ambient temperature range is -25 to 70 degrees Celsius. For storage the RZC01.2-6N-022-F-23 should be stored in a clean and dry space. The storage temperature range is -25 to 70 degrees Celsius. The relative humidity at during operation should be less than or equal to 90%. The air preset in the vicinity of an operating RZC01.2-6N-022-F-23 should not contain electrically conducting gases that can affect the operation of the module. Heat dissipated from the module can heat the surroundings. Therefore sufficient clearances must be provided on all sides to facilitate the flow of air. The chemistry module is designed for mounting in the vertical orientation. This unit can be shipped globally with a one-year warranty period from Wake Industrial.