Product Description
The RZC01.2-6N-007-F-23 chemistry module features ‘2’ design code. This Bosch Rexroth module is integrated with a gL type 16A backup fuse. The product is associated with plug type X2 connector. The device comes along with prefabricated wiring cables for connecting with the drive converter. This unit features an external 24V standby power supply with filter current feedback. The module is used as a part of the manufacturer’s RD500 drive system. The three U1, V1 and W1 terminals of this product are used to establish its power supply connection. The device comprises a cable cross-section of AWG 20-8 for the motor as well as power supply connections.
The module should always be stored in a clean and dry place. There should be no restriction to the specified free spaces for the supply air and exhaust air of the product during operation. The device must at all times be placed at a sufficient distance from any heat-sensitive product. It is to be installed inside a control cabinet. The metal enclosure of this unit has to be connected to the cabinet through a large surface area. This helps in establishing a good electrical contact. The RZC01.2-6N-007-F-23 module is available with a year’s Wake Industrial warranty.
The device is typically placed below a drive converter with at least 125mm clearance between them. This product encompasses IP 23 protection rating. The power and motor cables of the unit must be routed at least 20cm from each other for compliance with EMC requirements. It is used with a drive converter that operates at high voltage levels. The protective earth connection of the module must encompass minimum AWG 6 cross-section. The Pin 2 of the X2 connector in this device is used for the 24VDC incoming supply. We can ship the chemistry module to your address through dedicated freight partners.
Wake Industrial Warranty
