Product Description
The RZC01.1-6T-018-V-23 is a chemistry module which is an accessory for Bosch RD 500 servo drives. Bosch cannot be held liable for damages resulting from failure to observe the warnings given in the product documentation. All the operating, maintenance and safety instructions should be read before installing the device. Proper storage, handling and installation are necessary for optimal and safe operation of the module. Trained and experienced electrical personnel should work on the module and associated devices. Only original Bosch spare parts and accessories, and those approved by Bosch, should be used. The ambient conditions specified in the product manual should be observed. Operational conditions specified in the product documentation should be followed at all times. The device hardware must be kept in its original state. The source code for the device software must not be altered.
The RZC01.1-6T-018-V-23 is designed for mounting in a cabinet with IP23 rating. During storage the module should be protected from dust and kept in an environment where the temperature stays between -25 and 70 degrees Celsius. Dust-laden air must be filtered. The air in the operating environment should be dust-free and should not contain any gases that could damage the module. The nominal connecting voltage for the module is 400 Volts AC (three-phase). Current rating of the RZC01.1-6T-018-V-23 module is 30 Amps. A NAMUR strip is avaible on the RZC01.1-6T-018-V-23 as a standard feature. The rated power of data frequency converter 15 kilowatts. Bosch recommends vertical mounting of the RZC01.1-6T-018-V-23 on a flat surface. Metal enclosure of the RZC01.1-6T-018-V-23 should be connected through the largest possible surface area to the cabinet or mounting panel for the establishment of a strong electrical contact. This unit can be shipped globally with a one-year warranty period from Wake Industrial.
Wake Industrial Warranty
