Product Description
The RM65V-16DP-F is a PROFIBUS-DP bus module manufactured by Bosch Rexroth Indramat to function exclusively as a BUS participant on a PROFIBUS-DP bus system according to EN 50170. This product operates with a twisted, shielded pair of wires, which is used as a bus cable; the bus length can be up to 1.2 kilometers depending on the transfer rate. The RM65V-16DP-F is self-diagnostic, its supply voltage for logic and valve control is closed monitored when the value falls below the set threshold, an error signal is generated, and the diagnostic information is reported via LEDs. During operation, the RM65V-16DP-F bus module automatically sets itself to the baud rate given by the bus master. To minimize wire reflection and ensure a defined idle level in the PROFIBUS-DP transmission, a bus terminator is integrated into the bus module.
The recommended ambient temperature for the operation of the RM65V-16DP-F bus module is between 0 to 50 degrees; during storage, that ambient temperature around the module can reach 75 degrees without any problem. Each product packaging of the RM65V-16DP-F is fitted with certifications that illustrate that it has been approved to meet international standards. It is possible to configure the operation of the product using the configuration software designed from the bus module.
The RM65V-16DP-F bus module is made from aluminum material, which has high mechanical strength and is resistant to rust. The housing of this bus module is manufactured according to the IP65 protection; it can be installed in harsh environmental conditions and is not affected by interference such as dust and water spray. The product also operates with a rated input voltage of 24 volts. The module weights 1.43kg.