Product Description
The RS51.1-4G-024-D-NN-FW/S150 Bosch Rexroth drive control is used with grinding spindles that have high speed. The drive control must be deployed only for the original intended application. There should be no structural modifications to the product. This device has a 1 design code. The unit doubles up as a converter that has 3 x 380 to 480 VAC nominal connecting voltage. It has an output frequency ranging between 0Hz and 2,000Hz. The control intended to be used only with the mounted components and accessories approved and provided by the manufacturer. The device may move dangerously because of usage. The product must be operated only if the application adheres to the national EMC regulations.
The electrical installation of the control must be done following the safety regulations and general construction guidelines into consideration. The electrical power to the product is to be disconnected using a lockout switch and a master switch. Its power section is designed to support rear cooling. The device is CE Certified. The unit comes fitted with a type plate. This drive control is always meant to be stored between -25°C and 70°C. The product must at all times be used in a dust-free room. The device operates with derated data if the installation altitude exceeds 1,000m.
The drive control operates at high voltage levels. The product may have live control and power terminals even when the motor is motionless. The device comes equipped with a direct connection between the protective earth and reference ground. This unit has a nominal current rating of 32A. It can be parameterized using an operator panel. The panel displays a warning message if there is a critical operating status and highlights it until the status has been resolved. The product supports both basic parameterization and free parameterization. The drive control is available for international shipping with a year of Wake Industrial warranty.
Wake Industrial Warranty
