Product Description
The RS51.1-4G-014-L-V1-FW drive control manufactured by Bosch Rexroth must be installed inside a control cabinet. The control operates at high voltage levels. The product portrays U/f curve control. This device tends to have live control and power terminals even when the associated motor is stationary. The unit connection must be done in adherence to the line supply voltage and details listed in the rating plate. It can have a discharge current of up to 100mA. This drive control is connected to the motor at the U, V and W terminals of its X2 connecting point. The product must have a central connection when it is connected to another control.
This device comes with a direct connection between the protective earth and the reference ground. The unit supports a connection to a PC or an operator panel. Its user panel encompasses a copy function to save the parameter set. The drive control is fitted with an LED display that lights up in bright green color when the control is ready to power up. The product features basic parameterization and free parameterization. The device is intended to be commissioned only after its star or delta jumpers have been connected correctly to the motor terminal board.
The product depicts approximately one-third of the rated motor current in the steady-state condition. This device has a peak current rating of 29A for 60 seconds. The unit supports three ways of acknowledging a fault. Its parameters can be reset to the factory setting by using the load parameter set with 0071 parameters. The ambient temperature of the drive control gets exceeded when the heatsink temperature of its power section is very high. This product may cause material damage or human injury if it is not utilized properly. The control can be sent worldwide to the address of your preference with one-year backup support.
Wake Industrial Warranty
