RS51.1-4G-003-L-V1-FW

Product Description

The RS51.1-4G-003-L-V1-FW drive control depicts 1 design code. This Bosch Rexroth control has an inbuilt resistor and brake chopper. The product can cause burns if its resistors, heatsinks or housing are touched when it is in operation. The device commissioning should be done only after it has been programmed for the motor to perform the application-specific functions. The unit is meant to support installation only in commercial machinery. Its firmware has to be procured as a separate subitem. This control is to be secured against direct contact with the machine in which the installation is done. The product is associated with a copper conductor of a minimum 10mm² cross-section over its entire length.

The device is equipped with a power connection that must be isolated using an emergency stop circuit so that there is no unintentional startup. The unit has a 5A rated current. It should not be connected to electrical power during maintenance, repair or cleaning work. The drive control handling, as well as installation, must be done using suitable lifting equipment and tools. The product features electronic boards and modules that have to be touched only if it is absolutely necessary to do so. This device has a warranty period of one year.

The drive control depicts an integrated line reactor and radio interference suppression filter to lower the harmonics. This product encompasses a four-line graphical display. The device weighs 20kg. The unit has a J size code. It is possible to implement peer-to-peer coupling to achieve fast communication among multiple drives. The control supports 150% overload capability for one minute. The product storage is to be carried out in a clean and dry room. The airflow through the ventilators of the device must not be restricted in any form. This drive control with a backup support period for one year is sent to its destination through reputed freight carriers.