RD52.2-5B-007-L-A2-FW

Product Description

The RD52.2-5B-007-L-A2-FW drive control causes power loss and tends to heat the surroundings during operation. The installation of the Bosch Rexroth control must be done such that the airflow of its fans is not exceeded. The product exhibits derated performance if its ambient operating conditions are not exceeded. The device features a 22.5mm mechanical grid pattern. The unit is sized at 440 x 135mm. It must comprise at least 100mm clearance distance at the top and bottom inside the control cabinet for the entry of cool air and discharge of hot air. The different cables associated with this product have to be routed away from one another by a clearance distance of at least 20cm.

The drive control can be mounted next to another control without intermediate spacing if mounting rails with tapped holes are used. The device assembly must be done perpendicular to a level construction area. The unit incorporates a starting lockout mechanism as well as a standby external power supply. The metal parts of its switch cabinet must be connected with one another through the largest possible surface area to establish the best possible electrical connection. The product operates at high voltage levels. The device comes with a warranty backup for one year.

The device has chances of having dangerous voltage for up to half an hour of switching it OFF because of the inclusion of DC link capacitors. This unit has exposed live parts when it is worked on in an open state. Its U2, V2 and W2 motor connection terminals are located under the product. The product uses the X1 connector with eight poles for the DC link connection and power supply connection. The control is equipped with a protective conductor connection of AWG 6 or 10mm². We can send the device to any address through a reputed vendor network.