Product Description
The RD52.2-4B-018-L-A1-FW is a highly sophisticated three-phase industrial drive controller designed by Rexroth Indramat to carry out automation control in the industrial drive controller. This industrial drive controller is manufactured according to American and European quality standards; it is manufactured with quality industrial components that allow it to maintain efficiency as high as 95 percent under normal operating conditions. The RD52.2-4B-018-L-A1-FW industrial drive controller can be used to carry out expanded and freely combinable technological functions. It also contains an additional signal processor (32-bit floating point); this signal processor ensures the compatibility of the controller with highly sophisticated industrial machines with complex operational requirements. The wiring, configuration, and general operation of this controller are fairly easy procedures; however, to avoid machine breakdown and unexpected industrial accidents, these procedures should be carried out by well-trained industrial operators according to the configuration present in the user manual of the controller.
The RD52.2-4B-018-L-A1-FW industrial drive controller requires a rated current of about 35 amperes for optimum operation; however, it can also operate with a current as high as 46 amperes for about 60 seconds without experiencing any major electrical error. The rated electrical voltage required by this industrial controller can fall between 380 to about 480 volts. The RD52.2-4B-018-L-A1-FW industrial drive controller connects to the servo motor through two major types of electrical cables, the motor feedback cable, and the power cables. The power cable conducts electrical current to the industrial motor while the motor feedback cable is used for the exchange of digital information between the controller and the industrial motor.
The RD52.2-4B-018-L-A1-FW industrial drive controller also contains a built-in brake chopper which helps to protect its power circuit from the damage that can be caused by the excess current generated by the servo motor during motor deceleration. This product can be shipped globally with a one year warranty period from Wake Industrial.
Wake Industrial Warranty
